Stranger's Wrath HD: Controller Setup (XInput)

GHub Platform · Гайд · 0 ответов · 15 просмотров

If this has helped you, please rate it accordingly. Thanks! ---------- UPDATE - Some comments have mentioned the following, so I'm tossing them at the top of this guide to help out: you may need to configure Launcher.exe (in the game directory) to run as Admin in order to make controller changes you may need to turn off Xbox controller support in the Steam client ---------- Please bear in mind: I cannot troubleshoot for people. If you haven't already installed the drivers for your controller — or Windows isn't detecting your controller is even plugged in — then this guide does not cover that. That's probably a PEBKAC issue and you'll have to look elsewhere for help! I know many people have had issues trying to figure out how to get their XInput (XBOX-styled) controllers properly configured for Stranger's Wrath HD...and as far I could search, there wasn't a definitive guide on how to do this. If you try to just plug your controller in and hop into the game without any configuration, you'll quickly notice that nothing works intuitively. Navigating the menu alone from the title screen is difficult because you essentially have to begin trial and error to even use the "confirm" button. If you're using a controller like the Logitech F310/F710, please make sure your controller's input mode is set to XInput before attempting to run the game and configure your controls. The switch can be found on the top (or back) of the controller: If you are using a Logitech controller and do not do this, this guide will not match the desired results. Additionally, DirectInput is outdated and you should always try to use XInput if you have the opportunity. Upon running Stranger's Wrath HD, you should see the launcher window appear. Navigate to the "Configure" button next to the Controls' dropdown menu: You will see the window for configuring your controls has appeared. Most of the buttons are self-explanatory. Please follow along with this image as you rebind your controls: You do not need to worry about the buttons that the program has highlighted in red. Duplicates are expected and function completely normally: These buttons are used in completely different modes (first-person, third-person, menu, etc.) and do not conflict with one another. When you are finished, make sure you hit "OK" at the bottom or your bindings will not be saved. This will bring you back to the launcher main window. You will now see that "XYZ (Controller)" has been renamed to "Custom XYZ (Controller)": You're all set! Note: The game's default camera controls are inverted for the y-axis. If you do not like inverted cameras, simply toggle the y-axis flips for the first-person and general cameras. Additionally, consider altering the sensitivity (it may feel too high by default) as the game's age and translation to PC may be apparent: The binds I have configured and provided in this guide are the default controls for Stranger's Wrath HD. The original Xbox controller had a White Button and a Black Button instead of a Left Bumper and a Right Bumper. To maintain this guide's perfect configuration, I have treated the left and right bumpers as replacements for the white and black buttons, respectively. When the original Stranger's Wrath came out on Xbox, the White Button (Left Bumper in our case) was unused. However, feel free to improvise your controls if you have a different preference; just know that I will not be able to help you beyond this guide. Enjoy! If this has helped you, please rate it accordingly. Thanks! --- Источник: https://steamcommunity.com/sharedfiles/filedetails/?id=335123478