Настройки цвета света — рекомендации реальных ламп

GHub Platform · Гайд · 0 ответов · 17 просмотров

This guide is for those of us (including me) who usually don't know what to do with the light colour settings. The colours used here are taken from a Reddit post made by user draeath in the Space Engineers subreddit (link at the bottom). The settings for your lights can be found under Control Panel . The relevant sliders in there are R, G, B, and will in this post be formatted as R/G/B. Due to likely similarity with the standard 255 / 255 / 255 setting, not all of the 19 settings from draeath's post are presented, so here are the 14 best... CANDLE 255 / 147 / 41 40W TUNGSTEN 255 / 197 / 143 100W TUNGSTEN 255 / 214 /170 HALOGEN 255 / 241 / 224 CARBON ARCH 255 / 250 / 244 OVERCAST SKY 201 / 226 / 255 WARM FLUORESCENT 255, 244, 229 STANDARD FLUORESCENT 244 / 255 / 250 COOL WHITE FLUORESCENT 212 / 235 / 255 FULL-SPECTRUM FLUORESCENT 255 / 244 / 242 BLACK LIGHT FLUORESCENT 167 / 0 / 255 MERCURY VAPOR 216 / 247 / 255 SODIUM VAPOR 255 / 209 / 178 HIGH-PRESSURE SODIUM 255 / 183 / 76 The light used in this example was the Inset Wall Light from the Signal DLC. The settings used were: Radius — 5 Fallout — 1.3 Intensity — 1 The room in question was just something I hastily put together. A good tip in general is to size up Radius to fit the room you're in and then crank down Intensity so that it doesn't turn into a flashbang. https://www.reddit.com/r/spaceengineers/comments/3e0k38/rgb_values_for_various_types_of_realworld_lights/ --- Источник: https://steamcommunity.com/sharedfiles/filedetails/?id=3362243227